Skip to main content
Stesso

Install New Hose Bib

1:37
2:42
53.9K views

At 1:37 in

Save Time With The Easiest Repair Solution!

Watch on YouTube

What happens here

Install the new Woodford Brass Model 17 Hose Bib. Make sure that the rubber parts are coated with silicone grease before final installation.

Goal: Install the new hose bib.

Tools and materials

  • Silicone Grease NSF — Lubricating and protecting o-rings and washers

What they say

Hide

and check assembly repeat the process on the new one before you put the stem into the faucet do yourself a favor grab some silicone grease and rub down all the rubber Parts this is going to ensure that your O-rings and your rubber washers and everything are going to last a bit longer and then install the new assembly into the exist exting hose bib I had to repair two hose bibs here and the first one had a lot of lessons learned I don't have hard water like this in my area if you have a Model 17 Woodford brass hose bib save yourself all the frustration and just replace the guts yes I could have just replaced the

Auto-generated from the video audio.