Skip to main content
Stesso

Demonstrate Internal Bolt Extraction

1:17
2:05
1.9M views

At 1:17 in

Rusty bolts have no chance. #tools #rust #repair #shorts

Watch on YouTube

What happens here

The demonstration moves to a stripped internal bolt on the test fixture. The GRIPEDGE internal extractor is hammered into the stripped bolt. A unique feature, a movable sleeve, is then lowered onto the surface around the bolt, preventing the extractor from rocking and ensuring stable engagement. This allows for both loosening and tightening of the bolt with a ratchet. Finally, the sleeve is lowered further to push the extracted bolt right off the fastener.

Goal: The process of extracting a stripped internal bolt is shown, where the GRIPEDGE tool is hammered into the bolt, then a sleeve is lowered to prevent rocking, allowing the bolt to be loosened or tightened with a ratchet.

Tools and materials

  • GRIPEDGE Internal Extractor
  • Ratchet
  • Soft-faced Hammer
  • Test Fixture with Stripped Internal Bolt

What they say

Hide

our extractor, hammer it into a rounded out fastener. We have this sleeve here. So you can lower that sleeve down to the surface. That will prevent it from falling around. Then we can tighten and loosen with this extractor. So you can loosen as well as tighten and then with a sleeve here, you can lower that sleeve all the way down and then we'll push it right off the fastener. And just like that, we extracted the fastener. And with our extractor, you could actually reuse this fastener if you did

Auto-generated from the video audio.