Skip to main content
Stesso

Install Remaining Rafters

11:13
12:37
4K views

At 11:13 in

Roof Framing Math Made SIMPLE!

Watch on YouTube

What happens here

With the ridge beam temporarily set, use the previously cut pattern rafter to cut all remaining rafters. Once cut, install each rafter one by one, ensuring a snug and accurate fit between the main beams and the ridge beam. Each rafter should be secured with appropriate fasteners (e.g., hurricane clips, nails, or screws) according to local building codes. Work systematically, typically from one end to the other, to ensure consistent spacing (e.g., 16 inches on center) and proper alignment. Periodically check for plumb and squareness to maintain the structural integrity of the roof.

Goal: Completely frame the roof structure by installing all rafters.

Tools and materials

  • Circular Saw
  • Ear Protection
  • Fasteners
  • Hammer/Drill
  • Jigsaw
  • Measuring Tape
  • Pattern Rafter
  • Rafter Boards
  • Safety Glasses
  • Speed Square/Rafter Square

What they say

Hide

then we'll build a temporary brace for the outside so that it can sit right in there and it's going to stay nice and plum and centered exactly where we need it. So once we get that up in the air, then we can take those rafters that we just cut, install them, make sure that they're a good fit, rinse and repeat, install the rest of them, and that is pretty much your roof. From there, you're just going to want to install some sheathing. For sheathing, there's a couple options. You can use OSB oriented strand board, or traditional plywood. We

Auto-generated from the video audio.