Skip to main content
Stesso

Install Power Kit at Indoor Chime

0:59
4:47
58.4K views

At 0:59 in

RING Pro Video Doorbell FOR DUMMIES!

Watch on YouTube

What happens here

Locate the existing doorbell chime unit inside the house. This is typically located 10 feet above the floor near the front door. Remove the cover of the chime unit. Identify the transformer wires connected to the chime. The included Ring Power Kit (a small white module with wires) needs to be wired into these existing doorbell transformer connections. The video demonstrates loosening the screw terminals, inserting the Power Kit's wires, and tightening the terminals. The kit wires are labeled, making the connection straightforward. Once wired, tuck the Power Kit neatly into the chime unit and replace the cover.

Goal: Ensure the Ring Doorbell Pro receives sufficient power by wiring in the Power Kit at the indoor chime unit.

Tools and materials

  • Ring Power Kit/Adapter
  • Screwdriver (Phillips or Flathead)

What they say

Hide

are built in different time periods bring water to ensure that there's sufficient power coming to the ring doorbell system itself so they include this little power pack it simply just wires into your existing doorbell inside of your house nine times out of ten it's like located 10 feet above somewhere next to your door anyways and so what you do is you just wire right into it and it's pretty easy it's labeled exactly which wire goes where there's only two and then you should have enough power for your new doorbell alright now that we're done with a power pack on the inside of the house it's time to take

Auto-generated from the video audio.