Skip to main content
Stesso

Prepare Vanity for Spraying

7:50
49:27
19.6K views

At 7:50 in

Renovating Bathroom Cabinets: $25 Vanity to a $500 Vanity DIY

Watch on YouTube

What happens here

The vanity is placed on stir sticks to elevate it off the floor, preventing any paint from sticking to the ground. The painter then vacuums the vanity thoroughly and uses a brush to remove any lingering dust or debris. Finally, he puts on a respirator and gloves. He mentions the importance of wearing gloves when working with these products as they can stick to skin and be difficult to wash off. He uses an inspection light to check the surface for readiness before spraying.

Goal: Ensure the vanity surface is clean, elevated, and ready for paint application.

Tools and materials

  • Brush — Dusting off the surface
  • Gloves Nitrile Painters Gloves — Protecting hands from paint
  • Inspection light Milwaukee — Checking surface for imperfections
  • Respirator RZ Mask — Protection from paint fumes
  • Stir sticks — Elevating the vanity
  • Trimaco Insta-Pocket Trimaco — Holding a phone while protecting it from paint
  • Vacuum — Removing dust and debris

What they say

Hide

the vanity so i'm going to just get this thing up on some stir sticks so once again it's up off my floor so so we don't get anything sticking up off the floor i don't want anything kicking up i've done some sanding scraping so i'm going to vacuum this real quick all right we're going to get ready to spray here in just a minute i got a respirator i do whenever i um when i'm using like um modified urethanes water-based modified urethanes or oil modified acrylics or anything like that um those products have a tendency to stick really really well to your surface and they also have a tendency to stick really really well to you so i definitely like wearing gloves when i'm spraying and dealing with these products i don't get any of the product on my hands if you do i'll wash it off because it didn't pretty soon because it doesn't come off very easy in the shower by the end of the day so i've got my cabinet ready to go here we've got it aqua coated i do have an inspection light that i also use to keep where i can i'm somewhere handy where i can check out my surface to make sure it's ready to spray i'm just gonna dust it off real quick here and then we're going to begin spraying so just one final look over i can check out my surface one last time to make sure i do keep a tool belt with me just in case i need any all right we're gonna going to get ready to spray here

Auto-generated from the video audio.