Steam Wallpaper Backing
At 0:00 in
Removing Wallpaper Using A Steamer. Wallpaper Removal Hacks. DIY home improvement wallpapers
What happens here
Set up your wallpaper steamer according to the manufacturer's instructions. Fill the steamer's reservoir with hot water – no chemicals are needed for this process, as hot water alone is sufficient to soften the adhesive. Allow the steamer to heat up until it produces a steady stream of steam. Once ready, carefully place the steamer plate against a section of the remaining wallpaper backing on the wall. Hold it firmly in place for a sufficient amount of time (typically 20-30 seconds, or longer for stubborn wallpaper) to allow the steam to deeply penetrate the paper and dissolve the adhesive underneath. You'll often notice the paper darkening slightly as it absorbs the moisture. Move methodically across the wall, steaming one section at a time.
Goal: Soften the wallpaper paper backing and adhesive for easier removal.
Tools and materials
- Wallpaper Steamer Wagner — Applying steam to loosen wallpaper adhesive
- Hot Water N/A — Filling the steamer's reservoir to generate steam
What they say
(2,501 characters)Hide
What they say
(2,501 characters)Auto-generated from the video audio.