Reapply stripper and scrape stubborn layers

scraped off this first coat I'm going to test I usually brushed up one but got to do another coat I'm just going to test a roller with a stripper see if I can just get it on a little bit faster than brushing it I'm just using like a three-quarter inch High Roller this because the stuff is so thick I think rolling it on is just going to be a little bit faster but we've got several gotta discover this table has two coats of a multi-surface industrial acrylic um had a primer underneath that a bonding primer and then on top of everything it had a water-based poly so it's definitely taking a little bit but it's it's already cut it down to the on the wood on a lot of it four hours later that's the legs ate through pretty pretty quick and it's coming off but [Music] work in another coat I do like using this roll order just to get it on I'm not even going to use this screen I just got a bucket it's got a roller just goes on a lot faster with this ruler I gotta say so far it's going on easy it's there was no drips at all hung very well on the legs didn't run down the legs at all so I didn't have grips anywhere [Music] [Applause]