Prepare Retaining Wall Caps for Backfilling

started the caps will get glued to the course below it so any dust has to be removed to create a finished look the caps must be tight the faces must meet and the backs must match up no gapping is allowed on straight runs this is easy but if this was a curved wall every one of these blocks would need to be cut the boy slide the blocks slightly over the face of the retaining wall it's called an eyelash and it highlights the wall thumb to a snake the M blocks aren't thoroughly clean and the glue won't stick it had been cleaned and scraped but dirt kicked onto the wall during the bag fell with the final cap going in place the next phase of this project begins so