Clean Dust and Apply Clear Coat

I'm gonna use my pole of precision five just the air spray nozzle and I'm just gonna dust that thing off really good spray it and then I'm typically gonna spray one clear coat on it that I'm gonna bring it over on my inspection table see if there's any imperfections or anything that I need to sand one last time and shoot a second top coat on it but this one is looking really cool it's got a nice let's again like say what a nice metal finish look to it so this is kind of like a dusty dirty process so you want to make sure you know wherever you're at sounding this stuff that this stuff getting around you're gonna be stepping in it possibly to tracking the Drowned so just make sure that's not going to be a problem wherever you're off I'm gonna vacuum this off and think we'll be ready to shoot our clear coat okay I got my gun all set up got my spray powder and set up and then testing it in here I think I'm ready to shoot this door one thing was doing my sanding again when off the lunch came back forgot to put on my gloves when you're doing the sámi and the powder glaze that stuff's going to give all over your hands it is kind of messy so it's a good thing to always wear your gloves and then after I do the say I mean I switch out gloves and put clean gloves on to start handling my gun with once I've sprayed this thing off I've dusted it all off if I don't like it what it looks like here and I want to do a little bit more buffing there getting some more power glaze off I would send it out if I'm working with the crews send out the guys and say hey fix this or fix that but I'm ready to go what's good sample I'm in here talking teaching not wearing a respirator make sure you want a respirator even when you're inside of a spray booth spraying but I'm trying to teach at the same time I'm only doing one door I'm not doing a full set of kitchen cabinets at this point in time otherwise I would be wearing a charcoal respirator so I get my first coat on the door itself I did do the third pass on the door so typically I'm going to spray it one direction then I'm gonna crosshatch it and spray it the next question next direction once I looked at it it looked a little bit dry on one side so i justed my material flow up just a little bit because it wasn't enough material wasn't coming out for the speed I like to spray so I just said that and now it's just right I'm gonna set this one aside I'm gonna show you spray in one hanging up now on the PSD on Iraq we typically never…