Surface Preparation (Sanding and Cleaning)

and it's got a bunch of um iron stains on here hardware water stains on it kind of looks like a big skid mark going down you know the slide i'm not judging but we're gonna just spray it on so we're gonna sand it with some um sanding sponges or were not but he is somebody is that guy right there is going to do it we're going to mask it off we're going to spray it what are we going to spray with john we'll use a 310 tip we will either just load up into a 440 or we may grab a graco handheld ultramax and spray it with that because we don't need very much for a slide probably less than a quart yeah it's going to take less than a quart so just that handheld very simple yeah spray it and we may just have him spray it that's i mean who knows so um there we go i don't think we dropped some drop cloths down here we don't want any over spray down on the ground so i don't think there's nothing really special that has to be done no we're gonna scuff off the like you said with some sandpaper sanding blocks we're going to scuff up some of the surface get some of the rough parts off but multi-surface acrylic builds pretty high and this is going to be a gloss sheen so it should work great as a slide and after we sand it we're just going to wipe it down with either a denatured alcohol or acetone just to clean it get any contaminants off of it and there you go so stay tuned watch us make this thing look brand new again