Skip to main content
Stesso

Detailing Edges and Systematic Coverage

0:16
1:02
9.5K views

At 0:16 in

Polyaspartic top coat over Torginol hybrid flakes/Garage floor makeovers! #garagefloors #epoxyfloors

Watch on YouTube

What happens here

Throughout the application, workers continuously use the long-handled squeegee to spread the epoxy top coat. They meticulously work the material into corners, along the base of walls, and around any edges (such as doorways), as explicitly mentioned in the voiceover. This ensures that every part of the floor receives a uniform coating, eliminating dry spots and providing a clean, professional edge. This action is repeated multiple times across different sections of the garage.

Goal: To ensure complete and uniform epoxy coverage in all areas, including edges and corners.

Tools and materials

  • Long-handled Squeegee — To spread the epoxy top coat evenly across the floor, especially in detailed areas
  • Spiked Shoes — To allow walking on wet epoxy without leaving marks or disturbing the coating
  • Epoxy Top Coat — The protective and decorative coating being applied to the garage floor

What they say

Hide

So, I'm going to work this into this corner. Then I'm going to begin working it into the other room. Left a little bit of a ribbon up against the wall. Make sure there's nothing dry there. Going to make it back inside. work it into this corner. This is a corner that maybe typically I have a brush in my pocket if I needed to use a brush. I think I worked it underneath there good enough work down this edge. Get it to go in there. So, I don't want too far ahead of my room. So, I'll just pull this up and forward. How we looking on the trail?

Auto-generated from the video audio.