Perfect Crown Molding First Time! #woodworking #wood #diy

Moving your saw back and forth is like drilling holes like this. No one does that anymore. But we got a system here that's the easiest way to learn how to cut crown molding and it's the most accurate system ever invented. All you have to do is three simple steps. You figure out what your spring angle is. That tells you which of the three jigs you need to use. All three jigs come in the kit, 38, 45, 52. The second step, all you have to do is remember corners are not square. It comes with a patented protractor that measures your corner. Read the arrow that says corner, divide by two. That's your saw setting. The third step is, don't let anyone tell you they need to train you how to think upside down and backwards. All you have to do is look at the picture. You put the molding in the jig like the picture shows. You make the cut. All you have to do to be perfect is remember, spin the jig 180°. Do the opposite and now you have a perfect adjustment. So every single thing you need to know, the kit tells you how to do it and without any training or practice. >> Where can we get this at? >> So it's exclusively on outlawtoolcode.com.