Lay Pavers and Cut Edges

pavers now when it comes to installing your pavers you'll have to pick out a pattern there's different types of patterns out there from running bonds to basket weave to herringbone and different combinations that are out there some of these combinations might be limiting to the type of stone you choose to go in what made it easy for me is I just went on the pave stone website chose the type of pattern that I wanna see and then decided on the rock to go from there installing the paver is actually really simple gently lay the paver on top of the sand and then from that point on continue the pattern the best piece of advice I'll give you is keeping the joints as tightly together as possible in the long run each paver is going to depend on one another for strength on its sides so this is the best piece of advice I can give you now when you get to areas where the PVC channels are exposed just gently take a little bit of sand and fill in those areas but to continue your pattern you can definitely walk on the paper pad before it's all set in place just keep in mind not to let the pavers move side to side or else will disturb its level for some of the outside pieces that will need to be cut you can just easily do that with an angle grinder and a masonry blade this is super easy make your mark make your cut and install the stone once all the pavers are laid out it's time to set and level them off with a plate compactor you can rent a plate compactor