Seal Gaps and Mask Interior Components

and if just check for any leaks if you have any leaks now you can just do any type of filling in you need to fill in with production tape so i'm going to be using i could fill in with frog tape green that's more expensive so i'm going to be using some frog tape production tape to just do my fill in right here make sure i don't have any leak leaks on any of these edges this is all tacked there's kind of a little bit of leak there you can flop it over but i'm just going to do my fill ends right here if i need to do any type of filling in just tack that down there's a few small holes right here you can tack down just like this now that face frame is all masked off and ready to go back sides of the drawers just mask off just the same way i'm working around [Music] measure off my paper [Applause] tack that down pack it to my tape it's all good to go got to just fill in where my rollers are you don't want any over spray getting on your rollers so they won't roll properly there we go so that's how you do a face frame and a drawer front there's a lot of different ways that you can mask cabinets a lot of different scenarios but that's what it looks like you know using the tapes that i use