Understand Tools and Project Rationale
At 0:06 in
Painting drip metal. How to paint an old house exterior
What happens here
The presenter begins by addressing common questions regarding painting the fascia and drip metal. He showcases the specific tools he uses: a Wooster jumbo roller with a 4.5-inch width and a 1/2-inch nap for painting larger surfaces, and a Premier Riverdale 3-inch angled sash brush with Chinex filaments for cutting in and detail work. He explains that Chinex filaments are preferred because paint does not stick to them very well once dried, making cleanup easier, especially on hot days. He also explains that the metal drip edge is being painted because it was previously painted 12 years ago without peeling, and painting it creates a more cohesive and 'finished' look compared to leaving the dark metal exposed. He demonstrates how to store a wet roller in a brush baggie to keep it from drying out if it needs to be used later the same day, noting that these inexpensive rollers are typically discarded rather than cleaned at the end of a job.
Goal: Gather necessary tools and understand the purpose and durability of painting fascia and metal drip edges.
Tools and materials
- Brush Baggie — Storing wet rollers and brushes to prevent them from drying out
- Ladder — Reaching high areas of the fascia and drip metal
- Paint Bucket — Holding paint for easy access while working
- Roller Nap — Covering the roller frame to hold and apply paint
- Safety Glasses — Protecting eyes from paint splashes
- Wooster Jumbo Roller Wooster — Applying paint to the fascia and drip metal
- Work Gloves Firm Grip — Protecting hands from paint
What they say
(2,498 characters)Hide
What they say
(2,498 characters)Auto-generated from the video audio.