Execute Dustless Sanding with Appropriate Abrasives

nice cuz it's got a dustless uh sanding setup a 3x4 sander um is out here with my Unita ecosan um vacuum out there Unita vacuum that's a hepac it's hooked up there's almost zero dust when it comes to sanding when I'm doing doors I typically only use two abrasives I'll use a half a/2 inch open cell sponge abrasive just like this it's going to attach right to the sander and if I have to do any flat sanding I'm going to be using a pad saver film Tech or ecostorm a 320 grit to do the sanding there so I'll usually typically you'll either do 220 or 320 if I'm uh standing in between coats it's definitely a 320 sometimes it's 220 or um 220 or 320 you know just on the initial sand this door is in pretty good shape you know front and back there's no imperfections on it at all I've already sanded this with the flat erases so now I'm just going to go over the whole door and sand it with a half2 inch sponge and you'll see what that looks like now