Skip to main content
Stesso

Demonstrate Door Mounting System

0:45
3:46
2.1K views

At 0:45 in

Painting doors with the PSDRID.

Watch on YouTube

What happens here

The presenter demonstrates how the PSDR ID system holds the door. The system includes 'feet' that screw into the bottom edge of the door. He explains that these screw holes are not visible once the door is installed. He then shows special tools provided with the PSDR ID kit: a tool for inserting into the door's handle hole and another device that attaches to a hinge hole, which together allow for easily mounting and dismounting the door from the painting stand. He also mentions that if a door only has two hinge mortises (top and bottom), a third attachment point for the painting system can be created by screwing directly into the door's middle edge, which will then need to be spackled and touched up.

Goal: Understand how doors are secured and removed from the painting system

Tools and materials

  • Door Handle Hole Removal Tool PSDR ID — Assisting in lifting and removing the door from the stand by engaging the handle bore
  • Hinge Hole Attachment Tool PSDR ID — Providing an additional secure point for handling the door, typically fitting into a hinge mortise
  • PSDR ID Door Feet PSDR ID — Securing the bottom edge of the door to the painting stand
  • Screwdriver — Attaching and detaching the 'feet' and the hinge hole device
  • Spackle — Filling screw holes if a temporary hinge attachment point is made in the door's edge

What they say

Hide

so I don't have to breathe over spray I don't have to breathe you know silica dust and um chemicals from paint cuz it's just being you know evacuated out my booth out of window right here so the PSD rid comes with you know these feet right here the feet you just install they just screw right to the bottom of the door it's not an issue nobody can actually see the bottom of the door they screw on pretty easily the the setup comes with those feet uh it comes with the whole unit that actually it is mounted on you'll see that in just a minute it comes with I do get a lot of questions you know how do I get it off of the psdr ID it comes with these two tools that are used to remove the the door so this goes in door plunger hole right here and then there's a device that attaches to the hinge hole that comes with the uh psdr id2 so it comes with a whole uh a whole bunch of them I don't even know put it in the description right here how many it comes with it comes with a bag with the whole kit so you can do quite a few doors and then it comes with a thing that installs right here with the hinge if you um don't have a center hinge like quite a few of the doors that I'm working with right now they only have two hinges on top and bottom you're just going to have

Auto-generated from the video audio.