Skip to main content
Stesso

Final Cleanliness Check & Dry

5:46
8:09
34.2K views

At 5:46 in

Painting Chalky Surfaces! How to make your paint adhere better!

Watch on YouTube

What happens here

After cleaning and rinsing, visually inspect the door. To confirm all chalky residue is gone, gently wipe your hand across a section of the door. If your hand remains clean, the surface is adequately prepared. If any chalk transfer is observed, repeat the cleaning process in that area. Once satisfied with the cleanliness, use a clean, dry rag (like a microfiber cloth) to wipe down the entire door, ensuring it is completely dry before proceeding. If any sanding or rust removal is necessary, this is the appropriate time to address it, noting that Rust-Oleum offers rust-inhibiting primers for such cases; however, this specific door is in good condition.

Goal: Perform a final check for cleanliness by wiping a hand across the door, and then thoroughly dry the surface with a clean, dry rag.

Tools and materials

  • Dry rag (e.g
  • microfiber cloth)

What they say

Hide

surface when it comes to you know painting something like this the prep work is really important especially on a high traffic door like this get good adhesion of your product if your water starts to get too dirty just you'll get some clean water now one of the things you can do to test whether your door is clean enough you could just wipe your hand on it and see if you've got any residue on your hand you should have a pretty clean hand you know if not just clean it a little bit more i'm gonna get a dry rag wipe it down real quick if you got to do any sanding or rust removal this is the time to do that rust-oleum does have some products rust inhibited primers that will stop rust but this door is in good condition and ready to go so i'm gonna start masking this thing off get it all prepped and ready to spray

Auto-generated from the video audio.