Skip to main content
Stesso

Remove Masking While Paint is Wet

6:04
9:09
190.7K views

At 6:04 in

Painting a Home Exterior, DIY Tips From A PRO

Watch on YouTube

What happens here

When removing masking tape and film from windows and other protected areas, it is crucial to do so while the paint is still wet. The painter demonstrates rolling the masking material (tape and film) into itself as it's pulled off. This technique bundles all the wet paint and tape inside the plastic, preventing paint from dripping or sticking to other surfaces and making cleanup significantly easier. If the paint dries, the tape might tear, or paint might peel with the tape, leaving jagged lines.

Goal: Achieve clean, sharp lines by properly removing masking.

Tools and materials

  • Plastic Gloves — Protecting hands from wet paint during masking removal

What they say

Hide

when it comes to pulling your masking so I'm gonna pull my masking now and and I'm not just gonna toss it aside what I like to do is I got wet paint I'm gonna start rolling all my masking inside of itself like this right here and if you mask it right it should all come off you shouldn't have to get in a ladder now I'm gonna take I'm gonna get all my tape make sure all my tape is bundled inside my plastic all my wet paint is bundled inside the plastic now it's just a ball of plastic now when you actually put this into the bag you don't have tape like sticking to your trash bag and making your bag all stuck together it's simple little trick of rolling and bundling your masking up before putting it in your plastic bag so I typically will pull the

Auto-generated from the video audio.