Prepare for Spraying with Shielding Techniques

all right i'm going to start spraying here i'm going to give you one tip what i do hey garage spinning garage i'm always using a cardboard shield holder to do a lot of shielding there's a lot of shielding to be done in here and this will be one of those handy tools you have to have i do like the craft cardboard shield holder because it adjusts just by tapping it so wherever you want it on whatever angle you want it you can tap it to adjust but even though i got masking down here i'm still using a cardboard shield holder down here so i can keep overspray from dropping down to the bottom so i'll use it just in a manner just like that to control over spray from kicking down onto the ground so that's one way i use the kraft cardboard shield holder when it comes to corners and stuff i got a corner over here um i can show you what it looks like to shield a corner too so the corner is masked but i'm just gonna set my cardboard shield on this corner just like that and now i've just sprayed my corner so the corner itself the masking itself you don't have to use a cardboard shield holder but it's just added insurance that you're not going to get overspray kicking around there's going to be some corners um overhead and stuff i'll be using it on but that's it cardcraft card craft cardboard shield holder so here we go i'm going to spray