Skip to main content
Stesso

Measure and Detail the Cut Mark

0:18
1:01
1.8M views

At 0:18 in

One of our tricks to easy cuts. #hardscape #secret #technique #contractor #tools #shorts

Watch on YouTube

What happens here

Once the capstone is pivoted to reveal the cut line, measure the distance from the original end of the capstone to the newly determined cut line. In the video, the measurement shown is 1 and 3/4 inches. Use a Milwaukee brand measuring tape to transfer this measurement accurately. Then, use a speed square to draw a straight and clear line across the capstone at this measured point. This marked line will guide the concrete saw during the cutting process.

Goal: Create a precise and visible cut line on the capstone

Tools and materials

  • Measuring Tape Milwaukee — Accurately measuring the cut dimension
  • Retaining Wall Capstone — The stone receiving the cut mark
  • Speed Square — Ensuring the cut line is perfectly straight and square
  • Marking Pencil/Chalk — Drawing the cut line on the capstone

What they say

Hide

Pivot it until your knuckle hits the wall. Right about there. That's your cut. This needs to be back there. So, 3/4, I add an inch so you got more meat to cut on. 1 and 3/4, measure over 1 and 3/4. Get your line.

Auto-generated from the video audio.