Skip to main content

Test and Inspect the Breakaway System

0:24
0:44
10.6K views

At 0:24 in

One & Done Repair Kit. #trailer #truck #repair #kit #diy #tools #shorts

What happens here

After all components are installed, perform a functional test. With the trailer connected to the tow vehicle (but not necessarily running the vehicle), manually pull the pin from the breakaway switch. You should hear the trailer brakes engage (a low hum or click from the brake drums/actuator). If the brakes engage, the system is working correctly. Reinsert the pin firmly into the switch. Ensure the coiled cable allows full range of motion for turns without activating the brakes prematurely and that the safety cable is secure. Regularly inspect all connections for wear or damage before each towing trip.

Goal: Verify proper operation of the breakaway kit and perform final safety checks.

Tools and materials

  • Completed Breakaway Kit Installation N/A — The system being tested

What they say

Hide

cable, carabiner, and your tow tether. And Allen wrench and the tools required. >> So now this comes as a complete one and you're done system. >> Correct. Yeah. >> And this is the first day that you're actually showing this, right? >> Yep. It's It'll be available in October. >> And where do guys find this at, Neil? >> tow tether.com >> tow tether.com All right. Thank you, sir.

Auto-generated from the video audio.