Skip to main content

Install and Wire the Breakaway Switch

0:12
0:44
10.6K views

At 0:12 in

One & Done Repair Kit. #trailer #truck #repair #kit #diy #tools #shorts

What happens here

Mount the breakaway cable switch to a secure location on the trailer's frame, typically near the trailer hitch. The kit includes a mount bracket for this purpose. Once the switch is mounted, connect its two leads to your trailer's existing breakaway system wiring. This usually involves splicing the switch wires into the trailer's brake wire system, often using butt connectors (which are typically included with such kits or purchased separately). Ensure all electrical connections are secure and properly insulated to prevent corrosion or short circuits.

Goal: Mount the breakaway switch and connect it to the trailer's electrical braking system.

Tools and materials

  • Crimping Tool — To secure butt connectors to the wires
  • Electrical Tape — Additional insulation for wire connections
  • Screws N/A — To mount the switch bracket to the trailer frame
  • Wire Strippers — To strip insulation from the switch leads and trailer wiring
  • Butt Connectors — To join the switch leads to the trailer's existing brake wires

What they say

Hide

Neil, what are we looking at with this one now? >> What we have is a repair kit for your breakaway system on your trailer. Uh this kit here comes with everything um basically from your breakaway switch. Includes the butt connectors, your breakaway cable, carabiner, and your tow tether. And Allen wrench and the tools required. >> So now this comes as a complete one and

Auto-generated from the video audio.