Apply Natural Stone Veneer and Mortar
At 0:00 in
Old Fashioned Well With a modern Twist #water #sustainbility #offgridliving
What happens here
After the concrete block foundation has sufficiently set, proceed to apply the decorative stone veneer. The video shows this step in a time-lapse, where individuals are seen meticulously placing natural rocks. Mix a fresh batch of suitable mortar or thin-set adhesive. Begin by troweling a generous amount of mortar onto a section of the concrete block surface. Carefully select and place natural river rocks or fieldstones onto the mortar, pressing them firmly to ensure good adhesion. Work in manageable sections, allowing the mortar to partially set before continuing. Fill any significant gaps between the stones with additional mortar, using a pointing trowel or gloved finger to smooth and shape the joints for a cohesive and weather-resistant finish. Continue this process around all exposed sides of the enclosure, ensuring the framed access panel area remains clear. Allow sufficient time for the mortar to cure completely before proceeding to the next steps.
Goal: Facade the concrete block structure with natural stones for aesthetic appeal.
Tools and materials
- Drop Cloth — Protecting the surrounding patio or ground from mortar spills
- Mortar — Adhering stones to the block structure and filling joints
- Natural River Rocks — Creating the decorative exterior facade
- Pointing Trowel — Shaping and finishing mortar joints for a clean look
- Safety Glasses — Protecting eyes from debris and splashing mortar
- Trowel — Applying mortar to blocks and stones
- Work Gloves — Protecting hands from mortar and rough stones