Set Up and Prime the Airless Paint Sprayer
At 0:00 in
No extension here! #short #real
What happens here
Although not explicitly shown in the video, the airless paint sprayer must be properly set up and primed before use. This involves connecting the high-pressure paint hose to both the sprayer unit and the spray gun. The suction tube is then placed into the paint bucket, and the return tube into a separate waste bucket for priming. The sprayer is primed according to the manufacturer's instructions, circulating paint until all air is purged and a steady stream of paint flows. Finally, the correct spray tip is selected and installed on the spray gun, appropriate for the type of exterior paint and the surface being painted.
Goal: Prepare the airless paint sprayer for operation and ensure proper paint flow.
Tools and materials
- Airless Paint Sprayer — Pressurizing and applying paint efficiently and evenly to large surfaces
- Extension Wand — Extending reach and maintaining a consistent distance from the surface, especially on siding
- Paint Bucket — Holding the bulk exterior paint for the sprayer's suction tube
- Paint Hose — Connecting the airless sprayer unit to the spray gun
- Paint Spray Gun — Holding the spray tip and controlling paint release
- Spray Tip — Controlling the spray pattern width and paint flow rate
- Exterior Paint — Coating the house exterior