Address Tip Wear and Prolonged Usability

So another question comment that his come up is well, I don't use Greco Rack's guard So the tip is no good to me So once again, this is a prototype. It could be done in any tip It could be done in a tip that is that has a barrel size of like a Titan production tip It could be done in a barrel size of like a Tri-tack tip bed for tip it could be put in any tip So it doesn't have to be specifically a Greco Rack X tip It could be any tip that goes in any guard So another comment that did show up, you know When I made a post on this is well What if like the 515 wears out and now the tip is no good because it has another tip on there So if I'm spraying a lot of pain through the 515 and not very often spraying through the 310 Yeah, the 515 might get blown out, but the 310 is still good and usable I would actually just if the 515 got blown out says 615 on here I mean, I would just take a sharpie or something and just mark that out like okay This is no good the 515's no good anymore, but the 310 is and I would just continue to use the 310 as an Individual tip and not a good tip. So it's not like you know once one of the tips wears out You know you got to toss the other tips So one of the things about tips where not to if you're really in tune with the tips You can tell you know you don't have to just count the gallons like how many gallons have gone through a tip You can hear by the sound of it once the tip is getting blown out It starts a hiss and stuff a lot starts to get a lot of overspray and fall out But once that happens just mark off one of the things you can take your exacto knife or a 2-inch knife scratch it off or just Color it out with a sharpie and just keep it as a single tip