Hitching the Chipper to the Tractor

11:03

18:05

58.6K views

At 11:03 in

Mrs. Stoney Ridge wrenching the PTO Wood Chipper....broke my last sheer pin!!

Watch on YouTube

What happens here

The presenter and his partner proceed to hitch the fully assembled chipper to the Massey Ferguson 240 tractor. The partner guides the tractor driver, ensuring precise alignment of the tractor's three-point hitch with the chipper's attachment points. Once aligned, the stationary left arm is connected first, followed by the adjustable right arm. The process requires careful maneuvering due to the weight and immobility of the chipper on the ground.

Goal: Connect the wood chipper implement to the tractor's three-point hitch.

Tools and materials

Gloves — Protecting hands during handling
Hitch Pins — Securing the tractor's hitch arms to the chipper
Wood Chipper Titan Attachments — The implement being attached

What they say

(1,039 characters)

Hide

on the tractor to gotten me in we're gonna go into low reverse low and slow basically as you can see this left-hand side that I'm backing up the left side of the three-point stationary we need to get that as close as we possibly can and where we need to be we're right in line with where we need to be we got to pull that pin okay and hold onto the pin your pocket okay then we got to pull this we'll get your finger in there hey go kick it on there keep it on there okay sergeant p.m. go to the other side there you go kicking on there there you go got it this is a guard on the PTO shaft that will keep from catching you and throwing you into the machine all right when we pull up from here this whole crate is going to slide off with it okay so be prepared for that stand back a little bit as I pull off the middle crate should drop off if this isn't too heavy for this tractor it'll lift it up and we'll go on if it is too heavy we're not to sit it back down and hook it to the bigger tractor here you were in I'm in low one where's ha

Auto-generated from the video audio.