Skip to main content
Stesso

Adjusting Flail Mower Height

2:16
15:17
590K views

At 2:16 in

Mowing Thick, tall grass on the impossible Site - This Is oddly satisfying.Steep slope with washouts

Watch on YouTube

What happens here

To prepare the Ventrac 4500Z and its flail mower attachment for the task, the operator raises the cutting height. This is done by moving the rear pins on the mower deck to the 'F' setting, which corresponds to a 7-inch cutting height. This adjustment is crucial to clear potential hidden stumps, rocks, and logs embedded in the dense brush without damaging the flail mower's blades or transmission. The operator uses basic hand tools to unbolt and move the pins, then resecures them.

Goal: Set the flail mower to an appropriate cutting height to avoid obstacles.

Tools and materials

  • Flail Mower Attachment Ventrac — Attached to the Ventrac to cut dense vegetation
  • Hand Tools — Unbolting and moving pins for height adjustment (likely wrenches/sockets)
  • Ventrac 4500Z Tractor Ventrac — The primary machine for clearing the brush

What they say

Hide

we do is get the ventra ready to go. I'm going to raise it up to 7 in. Talking with Steve from Ventra says try if you hit stumps it's going to have you're going to have a bad day. Yeah. So So you think the stumps are lower than 7 in? No. But at least it's given us a little bit of a And he says it's not really good for uh trees either. So we'll have to cut them down, too. But he says uh I've cut them down with it. At least if we put it up to 7 in, we might clear some rocks or something that we don't see. Rocks. Yeah, rocks are really killer. And yeah. All right. So, let's raise it up. How do you do it? Um just move these back pins to SE or to F. And now once we get the machine hooked up, we got to just take the wheels and uh move them down. So I just got to unbolt them. I got tools here. So not that big of a deal. So you got to unbolt the wheels to move them down. Yeah. What's it What's it set at right now? Set at 4 in. Four. Okay. Well, we'll see. We don't know. I We don't know how well this is

Auto-generated from the video audio.