Skip to main content
Stesso

Prepare the Bathroom for Painting

9:43
33:45
55.8K views

At 9:43 in

Mold Remediation. How to Get Rid of Mold!

Watch on YouTube

What happens here

Before applying primer to the entire bathroom, proper preparation is key. Use a hand masker with 1-inch Frog Tape and 9-inch masking paper or 72-inch masking film to cover trim, baseboards, and any surfaces you don't want to paint. To ensure clean lines, dust off baseboards before masking. For electrical outlets and light switches, temporarily remove the covers and use 'Socket Blockers' – small plastic devices that stick over the openings – to protect them from paint splatter. These are reusable and more efficient than traditional taping for these small areas. Remove any hanging fixtures like towel bars or toilet paper holders to allow for seamless painting.

Goal: Protect non-paintable surfaces and fixtures from primer and paint.

Tools and materials

  • Frog Tape — Masking edges and preventing paint bleed
  • Hand Masker — Applying masking tape and film/paper simultaneously
  • Masking Film — Protecting large areas like shower walls
  • Masking Paper — Protecting larger surfaces from paint splatter
  • Screwdriver — Removing light switch and outlet covers, towel bars
  • Socket Blockers Paint Life Supply Co — Covering electrical outlets and light switches

What they say

Hide

the bathroom right here and this is the bathroom i'm being skim coating and doing a decorative coating and i i'm not really concerned about mold or mildew growth in this entire bathroom this is a really small bathroom it has a fan it has really good ventilation there's just some spots over the corner up high i'm just going to be spot priming it with a spray can these things got excellent hide you could spray at any angle and they're great for small projects and just doing touch-ups so it's just a simple little bomb can of the same type of product that's gonna kill because what i'm really just concerned about is whatever's there just killing it and then um just talking to the customer and encouraging them to make sure they use their fan and use it regularly in the bathroom so this is the corner that i'm going to be just doing some spro priming there's a few spots up here i was just a little bit concerned about so i'm going to be masking this i'm going to just take some plastic i'm going to be masking this entire bathroom but just to do this spot priming i like using frog tape i don't want anything bleeding any type of primer paint bleeding onto my tile frog tape is the best tape you can use this will stop any type of bleeding or paint um getting underneath your tape so i'm just gonna mask this off quickly right here i'm using a 72 inch masking film i'm gonna drop this and then we're gonna do some skim coating this bathroom to apply a metallic finish in here the ceilings are going to be painted white and left with their texture but the walls are going to be skim coated and be flat so i've got my primer i want to shake this up really good draw plastic so i don't get any overspray on anything and once again i don't want to prime things that don't need to be primed these walls everything's fine but once again i'm doing some mold remediation or killing of mold now just spraying this stuff on here that's gonna kill this mold and stop it from growing in these areas that i'm spraying it on if it was mold so you know i just suspect that it might be but i wasn't sure so it's done so now we'll let that set for 30 minutes it'll be dry to the touch in 30 minutes i can top coat i can start painting the ceilings in um 72 hours or um in an hour i need to paint you know within 72 hours if i don't the the effects of it inhibiting the growth uh might be um affected so make sure you topcoat it in 72 hours all right so i'm in the third bathroom and i'm dealing with um possibly…

Auto-generated from the video audio.