Skip to main content

Demonstrating 22.5-Degree Miter for Polygons and Rounded Corners

0:22
1:24
28.2K views

At 0:22 in

Miter saw detent

What happens here

The 22.5-degree detent is introduced as an angle commonly used when building polygons with more sides, such as an octagon (eight-sided figure). It is also useful for creating a 'rounded' appearance on corners, like when wrapping baseboard trim around a curved wall section, by breaking a single 90-degree corner into two 45-degree segments, each further cut at 22.5 degrees.

Goal: Understand the application of 22.5-degree miter cuts for polygons and rounded trim.

Tools and materials

  • Miter Saw RIDGID — Making the 22.5-degree cuts
  • Pencil — Pointing to the 22.5-degree detent
  • Small Wood Block — Demonstrating octagon construction and rounded corner trim

What they say

Hide

Zero is easy. That's a straight crosscut. 45 for when you need to make a 90. 22 and 1/2° is half of 45. And it starts to show up a lot more when you build things with more sides. Kind of like this octagon. 22 and 1/2 is really common when you need to break a corner into smaller angles, like wrapping baseboard around a rounded corner. And you'll see 15° used in trim work or when you want to build a dodecagon. My saw also has detents for 60 and 67.5,

Auto-generated from the video audio.