Milwaukee tools The WORLDS 2nd most powerful Impact

that is legitimately the heaviest impact that i've ever touched in my life wow that sucker is smoking [Music] took a pretty nasty chunk out of there really got that finger a little bit too good morning you guys we got a busy day today we have to go change a back blade um what did frank what did sam call this thing an assault ratchet this is the biggest baddest torque wrench built on planet earth as far as i know up to 2 000 foot pounds of nut busting torque remove and install up to 120 lug nuts lug nut mode prevents over torque so this also has the one key system in it and if you guys aren't familiar with what one key is there's an app on a phone and every person that has that app if you have your one key turned on you can customize the output of your of your piece of your tool your piece of equipment but you can also track it so if somebody walks off with that tool and somebody else happens to have that app and they could be hundreds of miles away from your job site that tool gets anywhere near that app it's gonna let you know where it is all right well it's not really an assault ratchet if you really want to know what this is this is the one inch d handle anvil high torque impact wrench with one key all right and so what this is actually designed for is power to complete heavy equipment maintenance so tires on heavy equipment it's like they got the trucks they got a dump truck they got an excavator there they got a traxxavator with uh looks like they got the cat the tracks highlighted they get a loader with a bucket lot so changing out buckets so one charge should give you 12 wheel hubs dude i jacked my elbow this thing is not light all right i think the next thing we got to do is take this to the scale and find out how much this bad boy weighs so we're going to be pairing the assault ratchet today with this m18 m12 rapid charger charges up to 40 faster but here's something really interesting we're also going to be putting it against this with this high output 50 percent more power and runs cooler hd 12 battery and check this out 50 more power and runs 50 cooler yadda yadda yadda red lithium c p x c h d now this is where it gets interesting light demand then they've got high demand but when you read the fine fine print right here you guys can't see this it says the hd 12.0 battery does not fit the following tools prior to 6 1 2018 manufacturing date without applicable service part and then they go in and go through all of the things but here's the deal you can go to milwaukeetool.com backslash innovations backslash lithium ion for available service options so if you want to retrofit this big bad boy onto some of the tools that they carry it may not fit everything interesting enough all right let's get the battery charging up and let's weigh that to it let's find out how much that sucker comes in at all right from dead to alive let's see how long it takes all right tool only let's set this up that is a 23.8 pound tool all by itself let's stick a battery on and see what that does to that total 27.2 pounds and you can see not i'm not pushing down i'm just balancing at 27.2 pounds with the battery connected i think that is legitimately the heaviest impact that i've ever touched in my life interesting we're already up to two bars on a completely dead battery how long has it been 11 minutes holy buckets 11 minutes huh that's pretty impressive now you gotta hold that on a nut that's rust welded on [Laughter] i have to hold my breath to hold it [Laughter] when you're working on heavy equipment and you don't have the power to break a nut off there's nothing more frustrating than trying to grab a 10-foot cheater bar get on it hope the bar doesn't slide off and smash you in the face breaking out your teeth that's where that little bad boy comes in handy fully charged ready to go under two hours defeats the whole purpose of it but so to do this to do this we had to buy an adapter yeah just because i couldn't find a one-inch socket that went down to this size here now these are rust welded on so let's just take a quick peek at these so we know what we're dealing with these have not been off yet since we bought this plow and i don't know how many years so this is complete rust welded in place so if there was going to be a challenge for it i would say taking off cutting edges is probably that and tires our two biggest things right okay that look right that looks right yeah i think so what side you want probably the side which one you want to start on get on there [Music] oh it actually took a little bit to snap that off there yeah it did i was holding onto that oh that's a broken finger too i got got a blood trail going around looking for a rag yeah didn't break it but took a pretty nasty chunk out of there really got that finger a little bit too okay we're back how to make some band-aids [Music] now yeah now we gotta get the bolt out of there [Music] [Applause] [Music] all right make sure to throw those screws out into the street no just i'm just kidding yeah this one this one over here ain't really lining up that sucks all right so most of these holes are not lining up with the new cutting edges so we have got to do some modification which kind of sucks but it is what it is you should just be able to set them in there and bolt them up instead this is kind of turning into a little bit of a thing dude i'm going to trace this one over here and then both of these end ones and then then yeah stick it back up in there and then do the middle we'll do the middles when it's up there yep just hold it up on those nope well i'm not really sure how things go in your company but for us nothing ever really goes as quite as planned but with a little bit of modification sam and alex were able to get this new cutting edge on with no problems uh you know we always say if it wasn't for murphy's law there'd be no law at all but i hope you guys enjoyed today's video that's what we got for you on this one god bless you guys go get em we'll see you on another one