Skip to main content
Stesso

Creating Removable Connections with Nuts and Bolts

0:30
1:09
146.6K views

At 0:30 in

Metal fasteners

Watch on YouTube

What happens here

This segment demonstrates using nuts and bolts for a strong, yet easily removable, connection. After aligning the holes in the metal pieces, a bolt is inserted. A washer is placed on the backside, followed by a nut. The bolt and nut are then tightened to secure the connection. The video emphasizes that this method provides a robust connection that can be easily undone when needed.

Goal: Achieve a strong, removable metal connection using nuts and bolts.

Tools and materials

  • Bolts — The primary fastening component
  • Nuts — Securing the bolt in place
  • Sheet Metal — The material being fastened
  • Washers — Distributing load and preventing material damage
  • Wrench — Tightening the nut and bolt (not explicitly shown, but implied)

What they say

Hide

And now you got a permanent connection. But, what if you need to take these apart? You'll have to drill through the head of your rivet. So, what if you want something easily removable? That's where a nut and bolt comes in. It gives you a strong, removable connection when properly sized. Just add your nut, and add your washer, and tighten down. And it's easily removable whenever you need to. But, what if you can't get to the backside? That's where rivnuts come in. They're reusable threads without needing access to the backside. Make sure that you match the thread to your

Auto-generated from the video audio.