Skip to main content
Stesso

Secure Masking in Windy Conditions

4:59
11:16
22.5K views

At 4:59 in

Masking to Spray on Stucco? Painting a Commercial Building Solo with an Inner Fed Roller!

Watch on YouTube

What happens here

When masking in windy conditions, it's essential to secure the masking film to prevent it from flapping and potentially causing paint contamination or tearing. As you pull the masking film down, immediately tack it in place with painter's tape. Apply short strips of tape at strategic points along the edges of the film to hold it taut against the surface. This technique ensures the film remains stable and provides continuous protection from overspray, even in challenging weather.

Goal: Prevent masking film from moving or detaching due to wind, maintaining overspray protection.

Tools and materials

  • Masking Film 3M — Protecting windows and surfaces from overspray
  • Painter's Tape Blue Tape — Tacking down masking film to prevent movement in windy conditions

What they say

Hide

it's just gonna keep yourself a duster brush and dust that off dust any cobwebs off also you got slightly windy conditions so again i'll show you i'll pull it down and tack it right here that'll hold it still you want to i keep a knife with me too so i can get you know perfectly straight corners when i'm masking my corners if i need to trim it i just use a two-edged knife with a blade and i can trim it you can tear pieces to make your corners sharp also and just fold and bend the tape to make the corner just the way you want it now i just tuck the rest up underneath and i like tucking it instead of cutting it that way you don't have pieces of plastic flying all over the place although the job site if it gets windy so tuck it underneath roll it down through the distance of your masking i'm using two inch tape today uh it's significantly more expensive

Auto-generated from the video audio.