Skip to main content
Stesso

Mask Windows with Tape and Film

1:56
11:16
22.5K views

At 1:56 in

Masking to Spray on Stucco? Painting a Commercial Building Solo with an Inner Fed Roller!

Watch on YouTube

What happens here

Protect windows from overspray by carefully applying painter's tape along the window frames and attaching masking film (plastic sheeting) to the tape. Ensure the tape is pressed firmly onto the frame to create a sharp, clean edge. The masking film should completely cover the window glass. For textured surfaces like stucco, use a squeegee or similar tool to press the tape into the contours of the surface, creating a tight seal. This prevents paint from bleeding under the tape and ensures a crisp, professional finish. The presenter specifically uses FrogTape with Paint Block Technology, which reacts with paint to create a micro-barrier, further sealing the edge and preventing bleed.

Goal: Prevent paint overspray and bleed onto window glass and frames, ensuring clean lines.

Tools and materials

  • Hand-held Masking Tool 3M — Dispensing tape and attaching masking film efficiently
  • Masking Film 3M — Covering window glass to protect from paint overspray
  • Painter's Tape FrogTape ProGrade Orange — Creating clean edges on window frames and securing masking film

What they say

Hide

and rolling but i'm gonna spray around these windows so i can get a nice crisp clean edge on the windows themselves and then i'm gonna back roll around the stucco after i spray the edges of the windows right in our fed roller instead of having two people working one guy spraying the one guy back rolling the inner fed roller makes it so you only need one guy to do the work so it kind of eliminates the need for a second guy but you get that ability to you know put your paint on extremely fast we don't want to get any over spray or splatter on our windows so we're masking them off i'm using frog tape with paint block technology and that swells up before paint bleeds underneath the tape so it's give me nice crisp clean lines when i'm masking my windows and doors i don't want to go on to the old color because once i pull my masking the old color would show signed just like a 16th of an inch you know down onto my your new color

Auto-generated from the video audio.