Skip to main content

Mix and Apply Body Filler (User's Initial Attempt)

1:11
30:46
34.8K views

At 1:11 in

Learning Old School NASCAR Bodywork: My First Time Using Bondo With Lessons From an "Old Timer"

What happens here

In a mixing area, apply a small amount of 3M Platinum body filler onto a clean mixing board. Add a small bead of blue activator (hardener) to the body filler. Mix the two components thoroughly and quickly using a spreader. Be aware that body filler cures very rapidly, especially in warm weather, so work efficiently to spread it evenly and thinly across the prepared seams and surfaces of the car. Avoid excessive application to minimize sanding later.

Goal: Apply body filler to fill imperfections and smooth seams.

Tools and materials

  • Gloves — Protecting hands
  • Mixing Board — Mixing body filler and hardener
  • Respirator — Protecting against fumes
  • Spreader — Mixing and applying body filler
  • 3M Platinum Body Filler 3M — Filling dents and smoothing surfaces
  • Blue Activator — Curing the body filler

What they say

Hide

this stuff it's like archeology I'm using regular 3M Platinum filler here and I've never mixed you know body filler bottle no whatever you want to call I've never done this before I had quite a rude awakening I'm going to put a little bit too much of the blue activator in there and I'm spreading it around then it turns into clumpy goo after like 30 seconds I'm like crap this sucks because it was really hot outside when I was doing this and definitely wasn't going to do it inside because the shop would get so freaking Dusty you'd never recover from that well now I got it spread it occurred to me I didn't have a plan for a second camera position and this stuff dries really quick so I just did it pretty much just waiting for it to get to the dry enough to where I could sand it try to spread it as nice as I can to make the sanding easier but you know sometimes on some weird stuff here it just doesn't work so a little more time with the same table

Auto-generated from the video audio.