Skip to main content
Stesso

Restore Water and Test for Leaks

1:15
1:29
28.4K views

At 1:15 in

Leaky Hose Bib? Try THIS first! #plumber #plumbing #diy

Watch on YouTube

What happens here

Slowly turn the main water supply back on. It is good practice to 'crack' the water on, allowing it to flow slowly back into the pipes. Keep the hose bib slightly open as the water returns to allow any trapped air to escape, preventing water hammer. Once a steady stream of water is flowing, open the hose bib fully. Finally, close the hose bib completely and check for any drips or leaks to confirm the repair was successful.

Goal: Confirm the hose bib repair is successful and leak-free

Tools and materials

  • Water Shut-off Key — Turning the main water supply back on

What they say

Hide

remember this is going to have to screw in a little bit before this part screws in. Let's take our adjustable jaw, give it a little final tighten, turn the water back on. Crack it. The line's going, water's moving. It's good to always keep something open, and then just go ahead and open it the rest of the way. Come back over here one more time for the moment of truth. Shut her down. Water stopped dripping.

Auto-generated from the video audio.