Skip to main content
Stesso

Install New Washer and Screw

0:38
1:29
28.4K views

At 0:38 in

Leaky Hose Bib? Try THIS first! #plumber #plumbing #diy

Watch on YouTube

What happens here

Using an assorted kit of flat bib washers and screws, select a new washer and screw that match the old ones. The video specifically mentions a '00 quarter inch' washer. Clean out any debris or corrosion from the valve assembly where the new washer will sit. Place the new washer onto the new screw, and then screw it into the end of the valve assembly. Ensure it is firmly attached. Then, carefully reinsert the spring and the newly assembled washer and screw mechanism into the valve body until it clicks into place, indicating it's seated correctly.

Goal: Replace the faulty sealing components of the hose bib

Tools and materials

  • Screwdriver — Attaching the new screw and washer to the valve assembly
  • Small Flat-head Tool — Cleaning out the valve assembly
  • New Flat Bib Washer — Replacing the worn washer to stop leaks
  • New Screw — Securing the new washer

What they say

Hide

This is not a good design. I actually don't have anything in my arsenal that's that long. This particular is a 00 quarter inch. So, we're just able to match that up. Clean that out a little bit. We'll take the two zeros. We'll flip them down. Make sure it's the whole way in there. Hopefully this doesn't have to come out for like another 20 years. Now, let's see about straightening that out a little bit. Once this is looking good, push this down on the spring, and just it kind of clicks right in place. Just goes straight back. Make

Auto-generated from the video audio.