Skip to main content
Stesso

Brake System Bleeding

4:47
51:53
237.2K views

At 4:47 in

Lake Speed's 90's NASCAR Thunderbird Resurrection: Running 780hp Wide Open at 75 Years Old!

Watch on YouTube

What happens here

Before the car can be driven on the track, the brake system must be thoroughly bled. This involves using a pressure bleeding tool, which consists of a custom-made adapter (fabricated from aluminum bar stock and a pressure gauge from a two-cycle engine pressure tester) that fits into the master cylinder. By applying controlled pressure to the system, air bubbles are forced out through the bleed nipples at each caliper, ensuring a firm and consistent brake pedal. This is a critical safety step to ensure the brakes are fully functional and reliable.

Goal: Bleed the brake lines to ensure a firm brake pedal and reliable braking performance.

Tools and materials

  • Brake Calipers Brembo — The components being bled
  • Custom Adapter — To connect the pressure bleeding tool to the master cylinder reservoir
  • Pressure Bleeding Tool — To apply pressure to the brake fluid reservoir for bleeding
  • Brake Fluid — To refill the master cylinder and purge air from the lines

What they say

Hide

enough for everybody a pressurized deal here put on The Pump It Up just push pressure pushes the fluid through would you make that out of yeah this is a pressure Chester we used a pressure check two cycle engines to make sure the crank case doesn't leak the crank cases leak on the two cycle that really can make the engines run too lean huh so after after you build an engine you always pressure check

Auto-generated from the video audio.