Skip to main content
Stesso

Prepare and Glue the Golf Tee

1:19
4:50
73.5K views

At 1:19 in

Kitchen Cabinet Repairs. Fixing Loose or Wobbly Doors.

Watch on YouTube

What happens here

If the stripped screw hole is particularly small, the golf tee may need to be whittled down slightly to ensure it fits deep enough. The presenter demonstrates using a utility knife to carefully shave a small amount of wood from the pointed end of the golf tee. After any necessary shaping, moisten the tip of the golf tee with a small amount of water, then apply a dab of Gorilla Glue to the moistened tip. The water helps to activate the Gorilla Glue, allowing it to cure faster and expand to fill the hole effectively.

Goal: Shape and apply adhesive to the golf tee for proper insertion.

Tools and materials

  • Golf Tee — The primary material for filling the hole
  • Utility Knife 2 EDGE — Shaving down the golf tee to fit smaller holes
  • Gorilla Glue Gorilla Glue — To secure the golf tee in the stripped screw hole
  • Water N/A — To moisten the golf tee, activating the Gorilla Glue

What they say

Hide

whittle down your little golf tees so they can fit in the hole because these are really tiny holes I haven't needed to on all of them some of them cuz the golf tee has a point on it I just jammed it in there and snapped it off and it's worked really well I do use guerrilla glue cuz it dries really really fast and it dries really hard you can use just regular wood grew wood glue but it takes a lot longer to dry you'll probably have to come back the next day the gorilla glue you can screw your screws into it the same day so I'm just gonna take my golf tee and it's a simple little process I just put a little bit of grilled glue on the end of my golf tee gorilla goo is a polyurethane is glue so if you wetted the golf tee it would dry a little bit quicker so I can just put a little moisture on the golf tee I'm gonna put a dab of the glue on there and I just want a little bit on the end because it's gonna swell up and I'm gonna stick it in the hole and then just snap it off so just snap it off really quick the end of the golf key is inside there that gives some wood backing for your screw to screw into I'm gonna let that set about an hour I'm gonna go around and do each one of these I got quite a few of these that are stripped because I think these doors have been took them off about four or five times and reinstalled

Auto-generated from the video audio.