Skip to main content
Stesso

Using a Stop Block for Identical Cuts

0:41
1:08
229K views

At 0:41 in

Kerf

Watch on YouTube

What happens here

For projects requiring multiple identical pieces, a stop block is the recommended solution. A stop block is a piece of wood clamped to the miter saw fence that acts as a consistent reference point for the end of the material. Once set, place the material against the stop block, ensuring the saw blade cuts on the waste side of the material, not impacting the measured length. This method guarantees that every piece cut will be exactly the same length, regardless of the kerf.

Goal: Cut multiple identical pieces accurately using a stop block

Tools and materials

  • Clamp — Securing the stop block to the miter saw fence
  • Miter Saw Ridgid — The primary cutting tool
  • Wood Board — The material being cut into identical pieces
  • Wood Piece — Acting as a consistent length reference

What they say

Hide

These two pieces are sitting at 4 in, and my third piece is going to be at 3 and 1/4 because every one of these cuts has to eat a kerf. So, if I need a bunch of identical pieces, all set at the same length, I'm going to use a stop block. So, now every cut puts my blade on the waste side and gives me the correct finish side. And if I need something to be absolutely perfect, I'll keep it a 16th long cuz you can always take more off, but you can't add more. So, anytime

Auto-generated from the video audio.