Reassemble showerhead holder

the inside geared and the outside geared okay so we'll just put all that back there not mess with that let's get something to dry the inside of that thread out because this is actually a little wet and get this right off I'll be using some Loctite blue this is removable thread Locker all right and we'll just put a little dab on that all right so there's two little Notch holes for this and this right here right the one on the bottom is the way we had it so it's actually going to be right here that's all back together just hold that right there in place screwdriver oh yeah that's gonna end up being way better this only goes in one way because it's kind of cone shaped right and then it's going to just click in place and you pop it out the same exact way and so you can take this and it just Clips right in there and now we're back and this is actually a lot tighter I don't think it's going to come out anymore and you can loosen it up from the other side to move this right this little bar right here allows you to move that other side this way and it should be good but this right here now