Skip to main content
Stesso

Configure Light Modes

6:33
17:03
22.8K views

At 6:33 in

Installing solar security lights around the house. InnoGear 30 LED and Litom 24LED

Watch on YouTube

What happens here

For the InnoGear gutter lights, press and hold the 'mode' button for two seconds. A single blink indicates one-quarter brightness, two blinks indicate half brightness, and three blinks indicate a dim mode. For full brightness (four blinks), press the button a fourth time. The presenter selects the full brightness setting. For the LITOM wall lights, remove the green tab from the battery compartment and slide the setting switch on the back to position '3' for 'sensor mode,' which means the light will automatically turn on at full brightness for 17-20 seconds when motion is detected in the dark.

Goal: Set the desired operational mode for both types of solar lights according to their instructions to ensure optimal performance when activated by motion.

Tools and materials

  • InnoGear SL2P Solar Gutter Lights
  • LITOM Solar Motion Sensor Wall Lights

What they say

Hide

them too and they've got a button on here that says mode and I'm not sure what mode to put them in but I'm gonna learn that in a second - we'll see I'll let you guys know if these things are crap or not and if it's something you might be interested in having on the outside of your shop or or something like that so when you walk up in the dark in the winter time you don't have to be blind you don't have to carry a flashlight okay guys so we read the instructions it says to press the button and hold for two seconds one blink is one quarter light I'll see there's one blink that's one quarter light we'll hold it again and it blinks twice that's half brightness okay we want to hit it again it blinks three times and that's dim mode three okay and we hit it four times and that is the Mac Daddy high brightness mode that we want do three four blinks so when we hang these up that'll be full brightness so when the wife he walks underneath there and when I show you again tonight these should be at their full bright setting rad does all these lights are fair compact which they're much more compact and I thought they would be the gutter light this light right here it's bright I expect it to be really bright now it's cold outside so that's gonna have an effect on the brightness until it gets good and warmed up now this little guy he has replaceable batteries so the reason I bought him is because I could replace these batteries at some point and basically you just pull this little green tab stick that in a trash pocket and turn it on the settings it has a setting thing for setting one two and three now we got some reading to do to see what one two and three I'm assuming one is dim two is medium and three is bad right so let's see got some reading to do here one is medium light mode two is dim light sensor mode and three is sensor mode the product charges in the day and auto runs from seventeen to twenty seconds and then the light will go off when there's no motion so we want it in three sensor mode and we're gonna program all four of them to be in sensor mode mode number three just that simple click the switch over cool hopefully they charged up good today I had them angled right at the Sun that solar panel guys this is a part of the

Auto-generated from the video audio.