Skip to main content
Stesso

Initial Surface Preparation: Sanding (Bare Wood/Old Finish)

0:52
11:48
86.6K views

At 0:52 in

INDUSTRIAL H20 Cabinet Coatings. Painting HAZARDS!

Watch on YouTube

What happens here

The first physical preparation step shown is sanding a cabinet door. The video briefly shows a cabinet door that was initially bare wood being hand-sanded to prepare its surface. This process smooths the wood, removes imperfections, and creates a suitable profile for subsequent coating applications. Although not explicitly shown, a crucial prerequisite for any cabinet painting project, especially those involving old finishes, is thorough cleaning and degreasing to remove grease, grime, and other contaminants that can impede paint adhesion. This step is essential before any sanding or primer application.

Goal: Prepare cabinet door surfaces by sanding to create a smooth, clean base for coating adhesion.

Tools and materials

  • Sanding Sponge
  • Cabinet Door

What they say

Hide

and so we were learning some of the the prepping systems prepping Bearwood doors to get them ready for these waterbased Coatings and then we were spraying with the all Apollo sprayers today so for me the liability when it comes to um using lacquers and I know I've sprayed lacquers for a lot of years and so of you abolutely and so now you've crossed over to using rener Coatings and so what is it with these Coatings that makes them safer and um and actually good enough for you to use yeah no absolutely so these are all water-based Coatings um the biggest difference is these are industrial wood coating so they're designed to dryy fast and have um you know a nice look to them and durability you know so the pre-cat lockers that you're used to using what I've used and my father and my grandfather have all used we're seeing the same durability and ease of use out of these water base and this was a door right here this was barewood right here and we took we

Auto-generated from the video audio.