Skip to main content
Stesso

Attempt Fastener Extraction (Failure)

5:16
11:42
593 views

At 5:16 in

I Screwed Up BIG TIME on This One...

Watch on YouTube

What happens here

After successfully drilling the pilot hole, the smallest screw extractor (Number 1) from a set of five extractors and five corresponding drill bits is chosen. The extractor is carefully tapped into the newly drilled hole to ensure a secure fit. An adjustable jaw wrench is then used to attempt to turn the extractor counter-clockwise to remove the broken bolt. However, the extractor snaps off inside the bolt due to the fastener's stubbornness.

Goal: Select the smallest screw extractor from a kit, insert it into the drilled pilot hole, and attempt to turn the broken bolt counter-clockwise. This attempt results in the extractor breaking off inside the bolt.

Tools and materials

  • Adjustable Jaw Wrench
  • Hammer
  • Needle-Nose Pliers
  • Screw Extractor Set
  • Screwdriver

What they say

Hide

of the bunch. It came in this kit with five different easy outs and five different bits. So now we're going to put the extractor in there. We're going to give this a couple taps. Get it in there. Make sure it's nice and tight. And then we're going to take our adjustable jaw wrench. And we're going to go counterclockwise with it. Well, now we break the extractor off in there. So now I think we're really screwed. Now let's go get a pair of channel locks. Grab the channel locks and pull out the needle nose pliers. Pull out the old leather man. See if we can get that to bite. Okay, my next question is what should I have used besides one of these stylish easy outs?

Auto-generated from the video audio.