Create a Spacer Jig
0:00
0:35
17.8K views
At 0:00 in
🎶 I get by with a little help from my @prowood scrap 🎶#build #deckdesign #framing #construction
What happens here
Begin by creating a simple spacer jig. Take a small block of wood, approximately 2x4 inches (or similar scrap wood), and mark it with a word like 'HELP' for identification, though this is optional. Position this small block perpendicularly at the end of a longer deck board. Use an impact driver and wood screws to securely fasten the small block to the deck board. This assembly will serve as a guide to maintain consistent spacing between deck boards or to establish a straight starting edge for the first board.
Goal: Fabricate a tool for consistent deck board spacing
Tools and materials
- Impact Driver Hitachi — Driving screws to assemble the jig and later for fastening deck boards
- Marker — Marking the small wooden block (optional, for identification)
- Wood Screws — Securing the small wooden block to the deck board for the jig
- Deck Board — The base of the spacer jig, which will also be used as a regular deck board
- Small Wooden Block — The spacer component of the jig, typically a scrap 2x4 piece