Skip to main content
Stesso

Insert/Replace Standard Trimmer Line

0:42
1:39
898.6K views

At 0:42 in

I didn't know pivoting made that much of a difference. #lawncare #tools #equipment #diy #shorts

Watch on YouTube

What happens here

To insert or replace the trimmer line, first ensure the trimmer is turned off and disconnected from power (if electric). Cut a section of standard weed eater line, approximately 12 inches long. Carefully thread one end of the cut line through one of the pivoting slots on the 1-2-TRIM head. Pull it through until the line is centered, with equal lengths protruding from both sides of the pivot. The pivoting action of the head will secure the line, preventing it from pulling out or breaking easily during use.

Goal: Properly load the trimmer head with new cutting line.

Tools and materials

  • 1-2-TRIM Universal Trimmer Head 1-2-TRIM — The head into which the line is inserted
  • Standard Weed Eater Line — The cutting material for general trimming

What they say

Hide

now? >> now. Okay, so what is making this actually work? >> guys. So, the magic here is in the pivoting technology. So, what we have here to insert the line, you just cut the line 12 in long, insert it like that, and it pivots. So, it absorbs all the impact in the pivot, so it keeps the lines from breaking. But, there's more. You can also use it with the nylon blades. Super safe, just install it like that. And then, for the bonus, we have a blower blade.

Auto-generated from the video audio.