Skip to main content
Stesso

Connecting the Seed Drill to the Tractor's 3-Point Hitch

15:30
25:01
52.3K views

At 15:30 in

I didn't expect this problem!

Watch on YouTube

What happens here

After successfully extracting the seed drill, the presenter demonstrates the ease of connecting it to the TYM T1104 tractor's 3-point hitch thanks to its electronic control system. This system allows him to precisely adjust the lower lift arms and top link from the rear fender of the tractor using push-buttons, eliminating the need to be in the cab. He slides the Category 3 pins (or Cat 2 with shims) into the lower lift arms and then adjusts the hydraulic top link to secure the implement. The top link also has a floating feature, allowing it to move freely and adapt to ground contours during operation, which is crucial for effective no-till seeding.

Goal: The presenter demonstrates the advanced electronic control system of the TYM T1104 tractor, which simplifies hooking up the heavy Woods Precision Super Seeder to the 3-point hitch.

Tools and materials

  • Category 3 Pins Generic
  • TYM T1104 Tractor TYM
  • Woods Precision Super Seeder PSS72 Woods

What they say

Hide

link and we'll get all hooked up so this is a cat 2 or cat 3 implement and this is a cat 3 right here so we'll slide the shim inside just like so and then we'll slide our pin in now this has a little bit of a different setup than most uh top links this has a floating top link in other words we don't need that the top link floats inside this slot right here if i can get the pin in i'm sure i can there we go and the top link will go back and forth and that allows this thing to cruise along the ground really cool we're going to raise up the three point a little bit here now you can see what i mean by that top link so we'll bring that top link in there we go and we'll level her out so this has a bar in place this bar goes back and forth and changes the angle of direction of our rippers in the front or our spiked rollers in the front depending on how much we want to tear up the ground ahead of the machine we pull a pin right down here slide it out and we can adjust however we like just like so so it's indexed down in here and this is basically a big wrench almost so we're gonna tear up the ground oh pretty vigorously on this one so i'm gonna set that back in place we'll go ahead and drop our pin now we're set up to rip just a little bit extra for this soil that we're going to be working up today let's go load up our seed boxes [Music] man that air conditions nice guys don't

Auto-generated from the video audio.