Skip to main content
Stesso

Install Ledger Board and Assemble Base Frame

2:38
57:28
238.1K views

At 2:38 in

I Built A Futuristic Loft Bed For My Kids

Watch on YouTube

What happens here

To establish the structural foundation for the upper bunk, the builder first locates wall studs using a stud finder. When the stud finder fails, he resorts to traditional measurement methods (16 inches on center from corners). He then marks and installs a horizontal ledger board made from 2x4 lumber, securing it firmly to the wall studs with screws. This ledger board will serve as a primary support for the bed frame, ensuring stability and safety. A separate rectangular frame is assembled on the floor from 2x4s.

Goal: Create the main support structure for the upper bed platform

Tools and materials

  • 2x4 Lumber — Constructing the ledger board and rectangular bed frame
  • Cordless Drill Ryobi — Drilling pilot holes and driving screws
  • Level — Ensuring the ledger board is perfectly horizontal
  • Measuring Tape — Accurate measurement of stud spacing and board placement
  • Pencil — Marking stud locations and cut lines
  • Stud Finder — Locating wall studs for secure attachment
  • Wood Screws — Securing the ledger board and assembling the frame

What they say

Hide

bones to work off of. Of course the battery's dead. Why wouldn't it be dead? We'll do it old school. Find the stud, measure 16 out, and hopefully that'll be a good place. Here's the game plan. This is just a little brace. I'm going to pick this up on my own, sit it on top, carefully come in, put some screws in, and then use this extra 2 by 4 as a brace, which will allow for me to figure out how I'm going to construct the sides of it. I have some ideas. They're pretty good.

Auto-generated from the video audio.