Skip to main content
Stesso

Rinse and Dry Dipped Object

2:35
12:26
608.5K views

At 2:35 in

Hydro Dipping my Dodge Challenger - Snake skin Dip

Watch on YouTube

What happens here

After the pattern has been successfully transferred to the object, it is carefully removed from the dipping tank. Any excess film residue or activator chemical on the surface of the object is then thoroughly rinsed off using clean water. The object is then set aside in a clean, dust-free environment to dry completely before the final clear coat application. This drying process can take several hours depending on environmental conditions.

Goal: Clean the hydro-dipped object and prepare it for clear coating.

Tools and materials

  • Air Dryer — Accelerating the drying process
  • Clean Drying Area — Allowing the object to dry thoroughly
  • Clean Water Source — Rinsing off residue
  • Hydro-Dipped Object Dodge — The object with the transferred pattern

What they say

Hide

you're going to know how to do it. But here's a little warning. Tad is a professional. He's been doing this a really long time, so he does make this look pretty easy. If you're not brave enough to try it on your own, you can actually send your parts to Tad at Q Printing and he'll take care of them for you. and he doesn't charge an arm and a leg. I'm going to actually put the phone number where you can reach him right here in this video and also down below. Guys, I wanted to show you what it looked like underwater doing this. And so, I'm actually going to put my iPhone underwater. And I was nervous because honestly I don't really trust half of the things that iPhone tells you that they can do. But here it goes.

Auto-generated from the video audio.