Start Pressure Washer and Final Safety Checks

10:17

13:09

6.5K views

At 10:17 in

How To Use a Pressure Washer | Professional Tips & Tricks

Watch on YouTube

What happens here

To start the pressure washer: confirm the gas valve is open and the choke is engaged (for a cold start). Simultaneously, hold down the trigger on the spray gun to relieve pressure in the pump while pulling the starter cord. Once the engine starts, immediately disengage the choke. A crucial safety warning: always ensure a spray tip is securely locked into the quick-release fitting on the spray gun before pulling the trigger with the engine running. An unseated tip can be ejected like a bullet, causing severe injury or even death. Always point the spray gun at the ground when initially pulling the trigger and only adjust to the target surface once the spray is controlled.

Goal: Safely start the pressure washer and prevent serious injury.

Tools and materials

Pressure Washer Mi-T-M — The main cleaning device
Pressure Washing Gun — To control water spray and relieve pressure during startup
Spray Tip Mi-T-M — To provide a controlled spray pattern

What they say

(1,663 characters)

Hide

squeeze the trigger cuz there won't be any compression behind the engine and the pump if you actually you'll pull the trigger down and pull at the same time so want to make sure it's on want to make sure my choke is on on now I'm going to start it soon as I start it take the choke off so I do want to give you a little um little Pro tip too so there is a little black o-ring inside your um quick releases that if you don't have a tip on here and you pull the trigger the force could actually blow that O-ring out and you won't know until you go put on the tip and then all of a sudden water starts shooting all over the place so you should actually never pull the trigger until you have a tip you know in there another thing is this is a major safety issue with a pressure washer you probably literally could put somebody in the hospital or possibly even kill somebody you know with one of these small tips like this if the tip is not locked into place if it's not locked into place and the quick release is a little bit loose you pull 4,000 PSI is going to shoot this thing out of your pressure washing gun like a bullet and we it's it's actually happened to me two times in my career where I didn't have it locked in place and I just pointed up in the air shot it and the thing was in a neighborhood and it was long gone thing is don't ever point this hit somebody and pull the trigger you really shouldn't point at the air because it's going to have to come down you should point it out the ground when you pull the trigger initially when the pressure washer is running make sure you put put it in make sure it's locked into place and then spray so here we go

Auto-generated from the video audio.